Jigs21 Compile V4.2 (2 Viewers)

[Jigs21]

Jigs21 MQ2 Compile v4.2


Notes:
--Current Compile Updated with: (MQ2-20070726a) Updated 7/28/2007

--Remember to use MQ2 responsibily, after every patch there is always a possibility of new detection methods.

--Map Changes Live

--Docrack InI with the updated offsets included.

--Thank you for the comments and the encouragement, it means a lot.



Recent Updates:
-- MQ2SuperStacker
-- MQ2Pop
-- MQ2Reward
-- MQ2Cast
-- MQ2CastTimer
-- MQ2Twist (Song of the Dryad's fix)


Currently Known Issues:
MQ2Size
MQ2PreventSpeed
MQ2Targets

The above plugins, are known issues that are being worked on. I will update the compile once they have been fixed. Please let me know if you have any other issues.

Plugin Update:
Temporarily, you will not find dangerous plugins that involve warping/packets. These plugins include, MQ2Rwarp, MQ2piggyzone, MQ2Pax, MQ2Speed,MQ2Allzone, MQ2Instamem, MQ2Workingassist, MQ2Doors, and Bzrsrch.

We are working on these, please remember to have patience, this is deffinately not an overnight project. I assure you we are getting closer and will hopefully be able to release them soon.


Instructions:

1. Download the zip at the bottom of this post
2. Unzip to a folder of your choice
3. Run MacroQuest2.exe from that folder
4. Run EverQuest.exe
5. In-Game, type "/plugin <plugin name> load" to add all plugins you wish to use
6. Refer back to this post for any syntax and plugin descriptions you need

 

[Jigs21]

Re: Jigs21 Compile V4.0

ATTENTION:

Plugin Authors, if your plugin is included in this compile, and you don't want it to be, send me a PM and I will remove it immediately.




*** REMEMBER: Commands listed below will not work unless you load the plugin that enables them first!!!

I have temporarily removed the non updated plugins from this list as they are no longer in the compile untill we get them fixed.

If there is a *before the plugin name in the list, I consider it to be an active hack.

--MQ2Advpath
--MQ2Autoforage
--MQ2Autoskills
--MQ2Bandolier
--Mq2Bardswap
--MQ2Bufftool (XML included)
--MQ2Cast
--MQ2Casttimer (XML included)
--MQ2Charnotes
--MQ2Chat
--MQ2Chatwnd
--MQ2Combat
--MQ2Cursor
--MQ2Custombinds
--MQ2Customsound
--MQ2Debuffs
--*MQ2DoCrack (XML included)
--MQ2Dps (XML included)
--MQ2EQBC (server, separate .exe file)
--MQ2Eqbugfix
--MQ2Eqim
--MQ2Events
--MQ2Exchange
--*MQ2Faerune
--MQ2Fakechat
--MQ2Fakelink
--MQ2Feedme
--MQ2Fps
--MQ2Hud
--MQ2Irc
--MQ2Itemdisplay
--MQ2Labels
--MQ2Linkdb (Download Database HERE)
--MQ2Main
--MQ2Map
--MQ2Melee
--MQ2Missing
--MQ2Moveutils
--MQ2Netbots
--MQ2Netheal
--MQ2Otd
--MQ2Pluginhook
--MQ2Preventspeed
--MQ2Randomstuff
--MQ2Rez
--*MQ2Size
--MQ2Slave
--MQ2Spellhotkeys
--MQ2Spellsearch
--MQ2Targets
--MQ2Telnet
--MQ2Timestamp
--MQ2Tracking
--MQ2Twist
--MQ2Xptracker


Plugin Descriptions and Syntax

MQ2AdvPath - Plugin version of AdvPath.mac and .ini.

/afollow [on|off] [slow|fast]
/afollow pause
/afollow unpause
/afollow spawn # [slow|fast]
/afollow [slow|fast]
NOTE: Fast default.
 
/play [PathName|off] [slow|fast] [smart] [pause|unpause]
NOTE: Fast default.
 
/record
/record save <Name>
/record checkpoint <Name>

AdvPath TLO's:

${AdvPath.Active} Plugin Loaded and ready
${AdvPath.State} // FollowState, 0 = off, 1 = Following, 2 = Playing, 3 = Recording
${AdvPath.Waypoints} // Total Number of Waypoints
${AdvPath.NextWaypoint} // Number of NextWaypoint
${AdvPath.Y[Check Point Name OR Waypoint number]} LOC
${AdvPath.X[Check Point Name OR Waypoint number]} LOC
${AdvPath.Z[Check Point Name OR Waypoint number]} LOC
${AdvPath.Monitor} // Spawn your following
${AdvPath.Idle} // Idel time when following and not moving
${AdvPath.Length} // Estimated length off the follow path
${AdvPath.Following} // BOOL Following spawn ?
${AdvPath.Playing} // BOOL Playing ?
${AdvPath.Recording} // BOOL Recording?
${AdvPath.Status} // INT Status 0 = off , 1 = on , 2 = paused?
${AdvPath.Paused} // BOOL Paused?

MQ2Allzone - Lock yourself in a zone temporarily

Syntax:

/lockazone - prevent yourself from zoning for up to 8 minutes (I think)

MQ2Autoforage - INI driven autoforaging

/startforage - commence autoforaging.
/stopforage - stop autoforaging.
/keepitem {item} - add/change the item in the .ini file to auto-keep.
/destroyitem {item} - add/change the item in the .ini file to auto-destroy.

MQ2Bandolier

USAGE
 
/createset <setname> slotname1|slotnumber slotname2|slotnumber2 ... (slotname21|slotnumber22)
Creates a set in MQ2Bandolier_<CharName>.ini using the selected equipment slots. If you use the name of an existing set, it will be over-written.
 
/deleteset <setname>
Deletes the specified setname from the characters ini.
 
/equipset <setname>
Equips all items of the specified set.
 
 
Example:
 
 
/createset ThisSet chest mainhand offhand
/createset ThisSet 17 13 14
 
 
Both of the above examples will create the following ini entry:
 
 
[ThisSet]
17=12345
13=23456
14=34567
 
--------------
 
/deleteset ThisSet
Deletes the ThisSet section in the ini
 
/equipset ThisSet
Equips all of the items from the ThisSet section in the ini

MQ2BardSwap - This plugin attempts to retrieve the current song from the twist plugin, if that TLO exists, and swap the correct intstrument into use.

MQ2BardSwap_Someplayer_Someserver.ini

[Settings]
Horn=/exchange "Me So Horny" mainhand
Drum=/exchange "Tambourine of Wonder" mainhand
Lute=/exchange "Lute Skywalker" mainhand
Wind=DISABLED
Singing=DISABLED
Weapons=/exchange "Really Really Really Sharp Knife" mainhand
Delay=21
[Exclude]
;instruments don't have an effect on these
exclude1=Requiem of Time
exclude2=Selo's Rhythm of Speed
exclude3=Selo`s Assonant Strane
exclude4=Song of Sustenance
exclude5=Alenia`s Disenchanting Melody
;no swap for my Composers Greaves click please
exclude6=Selo`s Accelerating Chorus
;or lute of the flowing waters click
exclude7=Wind of Marr

Syntax

/bardswap - Toggle swapping on and off.
/bardswap melee - Toggle using "Melee swap" delay.

MQ2BuffTool - This is also a plugin that will click off buffs automatically, but includes some logic to decide what to click off.

TLO Added

${Block.Ready} (bool Plugin Loaded && InGame && Bloc Enable)
${Block.Quiet} (bool Always true or NULL if plugin not loaded)
${Block.Popup} (bool Should i Popup Msg on Spell Block?)
${Block.Count} (int # of buff in bloc list)
${Block.Total} (int # of buff blocked so far)
${Block.Spell[X]} (int # of free slot for a spell -1 not found)
${Block.Maxim[X]} (int Maxim # of Buff (1=buff,2=song,3=pet))
${Block.Avail[X]} (int Avail # of Buff (1=buff,2=song,3=pet))

Syntax

/Command Common to ALL (ie /block /unblock /clickoff)
/Command /Help (Show Help)
/Command /List (Show List of Spells Being Blocked)
/Command /Load (Load Settings and Bloc List from INI)
/Command /Save (Save Settings and Bloc List to INI)
/Command /Block (Toggle on/off Scan for Bloc Buffs)
/Command /Popop (Toggle on/off Display of Popups)
/Command /Window (Popups XML Windows)
 
/Block <##/Name/[Set]> <MODE>
/Block ## <MODE> (spell on slot ##, -## for song)
/Block Name <MODE> (spell matching that name)
/Block [Set] (spell list from INI)
 
<MODE> 0=always(default) 1+ free buff to keep (Optional)
 
/Unblock <##/Name/[Set]>
/Unblock ## (remove Block from bloc list ##)
/Unblock Name (remove Block for that spell name)
/Unblock [Set] (remove Block for this List from INI)
 
/Clickoff <##/Name/[Set]>
/Clickoff ## (click off slot ##, -## for song)
/Clickoff Name (click off buff matching that name)
/Clickoff [Set] (click off buff from List in INI)

MQ2Cast - This is a plugin form of Spell_Routines.inc, and far, far superior. It can, among other things, memorize and cast spells, recast them, and, with the use of MQ2CastTimer, moniter the estimated duration on longterm spells like DoTs, Buffs, etc. The plugin can also deal with events, similar to MQ2Events.

SYNTAX FOR MQ2CAST

A nice little HUD snippet to go with the plugin:

[CASTING]
CS1=3,425,150,255,255,255,~~ CASTING ~~~~~~~~~~~~~~~~~~~~~
CS2=3,425,162,255,255,255,Cast Effect: ${If[${Cast.Effect.ID},${Cast.Effect.Name},NONE]}
CS3=3,425,174,255,255,255,Cast Timing: ${Cast.Timing}
CS4=3,425,186,255,255,255,Cast Ready : ${Cast.Ready}
CS5=3,425,198,255,255,255,Cast Status: ${Cast.Status}
CS6=3,425,210,255,255,255,Cast Result: ${Cast.Result}
CS7=3,425,222,255,255,255,Cast Stored: ${If[${Cast.Stored.ID},${Cast.Stored.Name},NONE]}

 

[Jigs21]

Re: Jigs21 Compile V4.0

MQ2Combat - Basic autocombat plugin

/combat -- autocombat command
/combat help -- For help on usage

When attack is pressed, it'll check the distance you are from the mob. if you are within xxx distance, it'll /stick to the mob (if /combat stick on). It will press your combat abilities based on the ones you set (Bash, Taunt, Kick). Up to 10. If a mob enrages or infuriates, it'll turn off attack or back off the mob to avoid the rampage.
 
If assist is set, it'll assist the assist until it gets a valid target and that targets hps are <= your setting before attacking.
 
If follow is set, it'll try to /stick to the person marked to follow if they get so far away from you.
 
It'll auto accept group invites.

MQ2Cursor - s0rcier version of MQ2Autodestroy, with a bonus or two, because s0rcier is god.

/cursor on|off|auto :Turn Plugin On/Off or Toggle
/cursor silent on|off|auto :Turn Quiet Mode On/Off or Toggle
/cursor feeding :Turn Feeding Mode On/Off or Toggle
/cursor dropping :Turn Dropping Mode On/Off or Toggle
/cursor help|list|load|save :Hope No description need for those.
/cursor rem(ove)|del(ete) id :Remove id or (Item on Cursor).
/cursor al(l(ways) :Always keep those (Item On Cursor).
/cursor #[ st(acks)] :Keep quantity (Item On Cursor).
/cursor random # :Random Humanish delay in ms 0=off.
 
/keep :Keep Item on Cursor (no list adding).
 
/feedme on|off|auto :Turn Plugin On/Off or Toggle.
/feedme thirst # :Thirst Level, 0 turn off drinking.
/feedme hunger # :Hunger level, 0 turn off eating.
/feedme help :Need help for that?
/feedme silent on|off|auto :Turn Quiet Mode On/Off or Toggle.
/feedme random # :Random Humanish delay in ms 0=0ff.
 
/lootme on|off|auto :Turn Plugin On/Off or Toggle.
/lootme silent on|off|auto :Turn Quiet Mode On/Off or Toggle.

MQ2Customsound -- Assigns custom sounds to chat events.

The MQ2CustomSound plug-in allows MQ2 users to define custom sound events that play based on unique chat events. These events and the sound effects that are played for them are dictated entirely by settings found in the MQ2CustomSound INI file.
 
 
With MQ2CustomSound, you can have a sound play...
- Whenever anybody (or certain people) send you /tell's WHILE FILTERING OUT NPC TELLS!
- When a spell drops or is resisted
- When you enable a discipline or a discipline drops
- Whenever somebody says any particular word, or mentions any particular item
- When you get hit/stunned/zone/die/camp/etc.
 
 
COMMANDS:
-----------------
 
/togglesounds - Turns all custom sound events on/off DEFAULT: OFF
 
/npctellsounds - Turns NPC tell filter on/off, when ON - tells that come from NPCs will not fire sound events DEFAULT: ON
 
/notradersounds - Toggles the Trader Sound Filter on/off. When ON, tell sound events from characters in trader mode will be suppressed. Note: Trader filtering only works when in the Bazaar DEFAULT: OFF
 
/sound [sound name] - plays the sound identified with a particular sound name (from the INI) - this is based off the MQ2PlaySound plug-in by Digitalxero and was included here for completeness
 
/sound stop - immediately stops the play-back of whatever sound is currently playing
 
 
INI FILE SETUP:
-----------------
 
In order for any sound effect to be played, you must create and configure your MQ2CustomSound.ini file. For the purpose of explaining how it all works, here is a sample INI file:
 
;>> START Sample MQ2CustomSound.ini START<<
[Events]
keys=tell|zone|camp|
 
 
[MatchStrings]
tell=tells you
zone=LOADING, PLEASE WAIT
camp=It will take you about 30 seconds to prepare your camp
 
[Sounds]
tell=C:\\MQ2\\sounds\\AIMding.wav
zone=C:\\MQ2\\sounds\\jeopardy.wav
camp=C:\\MQ2\\sounds\\astalavista.wav
waycool=C:\\MQ2\\sounds\\billandted.wav
 
;>> END Sample MQ2CustomSound.ini END<<
 
The INI file creates our custom events (the Events section), defines the text the plug-in must match in order to fire the event (the MatchStrings section) and then provides the sound file that should be played when the
event fires (the Sounds section.)
 
 
Defining Events:
All event names should be listed together in the 'keys' entry, separated by the | character. The sample INI above defines three events: tell, zone, and camp. These event names are then used in the other two sections of
the INI file, so make sure you use the same case and names throughout.
 
For every event name you must have a corresponding key in both the Match String and the Sounds sections!
For every event name you must have a corresponding key in both the Match String and the Sounds sections!
For every event name you must have a corresponding key in both the Match String and the Sounds sections!
 
NOTE: The last event name in the keys entry should ALWAYS end with a | as well.
 
 
Defining Match Strings:
Match Strings define the text that the plug-in matches in order to play the right sound. This text should appear in the INI file exactly as it does in-game and uses the event names defined in the [Events] section as keys.
 
In the example, since we defined events for tell, zone and camp, we have tell, zone and camp keys defined in the [MatchString] section. From this we can see that the tell event is fired whenever text containing "tells you" appears in any text window within EQ, while the zone event fires whenever the text "LOADING, PLEASE WAIT" appears, and the camp event fires whenever the text "It will take you about 30 seconds to prepare your camp" appears.
 
 
Defining Sounds:
The sounds section defines the actual sound files that should be played when an event is fired. This should be a full path location and the backslach character ( \ ) must be padded ( \\ ) in order to function properly (see example.)
 
In the example, since we defined events and match strings for tell, zone and camp, we also have tell, zone and camp keys defined in the [Sounds] section. All of the files in the example are located in the C:\MQ2\sounds\ directory and AIMding.wav would play when you received a /tell, jeopardy.wav would play when you zone, and astalavista.wav would play when you start your camp!
 
You can also define sound keys that are not automatically fired by any text event. This is what you see in the 'waycool' key in the [Sounds] section in the example. This enables us to play a sound using the '/sound
waycool' command. Possible reasons for using such an event would be the inclusion of sound effects in MQ2 macros, or included in your own EQ hotkey macro's, etc.
 
 
Supported Sound Formats:
Technically play-back of sounds is handled by Windows, so any file format that Windows has a supported driver/codec for should be supported. However, I've only had luck getting it to play .WAV files, so you're best just to use them! Many MP3 applications (WinAmp) can convert from MP3 to WAV if you need to. There's also tons of .wav files to be had out on the net.

MQ2Debuffs - Nice little plugin that figures out how many counters of what type you have and makes it available as MQData. Has a HUD attachment that can be added.

// MQ2Data:
//
// Debuff (bool True if you have debuffs on that have counters on them, false if not)
// Debuff.Poisoned (int # of poison counters on you)
// Debuff.Diseased (int # of disease counters on you)
// Debuff.Cursed (int # of curse counters on you)
// Debuff.Poisons (int # of poison spells affecting you)
// Debuff.Diseases (int # of disease spells affecting you)
// Debuff.Curses (int # of curse spells affecting you)
// Debuff.Count (int # of debuffs that need cured, does not include snare)
// Debuff.HPDrain (int Amount of HP you are losing per tick from debuffs. This value is POSITIVE)
// Debuff.HPDrain[X] (int X= Disease, Poison, Curse, All: Number of specific counters effecting HPDrain) 
// Debuff.ManaDrain (int Amount of Mana you are losing per tick from debuffs. This value is POSITIVE)
// Debuff.ManaDrain[X] (int X= Disease, Poison, Curse, All: Number of specific counters effecting ManaDrain) 
// Debuff.Slowed (bool True if you are Slowed (melee attacks), False if not)
// Debuff.SpellSlowed (bool True if you are SpellSlowed (spell haste reduction), False if not)
// Debuff.CastingLevel (bool True if your Effective Casting Level has been reduced, False if not)
// Debuff.HealingEff (bool True if you are Healing Effectiveness has been reduced, False if not)
// Debuff.SpellDmgEff (bool True if your Spell Damage Effectiveness has been reduced, False if not)
//
// koad 09-11-2005 added these members:
// Debuff.Snared (bool True if your are Snared, False if not)
// Debuff.ManaCost (bool True if your Spell Mana Cost has been raised, False if not)

*This* part can be added to your MQ2Hud if you run the plugin. You may need to alter some of the numbers to get it going for your UI set up. Check out the MQ2Hudmove plugin in the zip's info for some basic ideas on how to do this.

[Elements]
PoisonCounter=1,400,170,0,250,50,${If[${Debuff.Poisoned},${Debuff.Poisoned} POISON,]}
DiseaseCounter=1,400,185,200,200,50,${If[${Debuff.Diseased},${Debuff.Diseased} DISEASE,]}
CurseCounter=1,400,200,250,200,150,${If[${Debuff.Cursed},${Debuff.Cursed} CURSE,]}
DrainHP=1,465,170,250,0,10,${If[${Debuff.HPDrain},-${Debuff.HPDrain} HP/tick,]}
DrainMana=1,465,185,0,50,250,${If[${Debuff.ManaDrain},-${Debuff.ManaDrain} Mana/tick ,]}
BadThings=1,400,220,255,0,10,${If[${Debuff.Snared},SNARED ,]}${If[${Debuff.Slowed},SLOWED ,]}${If[${Debuff.SpellSlowed},SPELLSLOWED ,]}${If[${Debuff.CastingLevel},EFFCASTLEVELDOWN ,]}${If[${Debuff.HealingEff},HEALEFFECTIVEDOWN ,]}${If[${Debuff.SpellDmgEff},SPELLDMGDOWN ,]}${If[${Debuff.ManaCost},MANACOSTUP ,]}

That hud is produced from a buffbar looking like:

And the resulting HUD would look something like this:

MQ2DoCrack - This plugin facilitates applying memory patches to the eqgame.exe process.

Syntax

/docrack list 
- Lists all available cracks and their current status. 
 
/docrack <crack name> [on|off] [silent] 
- Apply or remove <crack name>. [silent] does it without printing out 
anything (used during startup). 
 
/showmem <address> <bytes to show>
- Shows X amount of bytes of memory at specified address 
 
/dooffset <address> <memory>
- Writes supplied memory to specified address
 
/docrackwnd
- Opens or closes the DoCrack window - must have XML file in your UI folder

MQ2Doors - This plugin allows you to hide unlocked doors and walk through them.

Syntax

/toggledoors on - Hides all doors in current zone.
/toggledoors off - Shows all doors and disables 'always' toggle.
/toggledoors always - Hides all doors as soon as you zone anywhere.

MQ2Eqbc - This plugin allows you to send remote commands via box chat much like mastermind does, remotely log into a different character (ie. load up cleric for rezzing) and control anyone anywhere (ie. someone in your raid needs to afk for a while: they connect to your server, you remotely load macros as pimp their char as needed until they return). (Yea, this is the SHIT, I know.)

Syntax

/bccmd connect <server> <port> (defaults: 127.0.0.1 2112)
/bccmd quit (disconnects)
/bccmd help (show help)
/bccmd status (show connected or not)
/bccmd reconnect (close current connection and connect again)
/bccmd names (show who is connected)
/bccmd colordump (show color codes)
/bccmd togglecontrol (toggle allow control)
/bccmd togglewindow (toggle dedicated window)
/bccmd toggleautoconnect (toggle auto connect)
/bccmd togglecompatmode (toggle IRC Compatability mode)
/bccmd togglereconnect (toggle auto-reconnect mode on server disconnect)
/bccmd setreconnectsecs n (n is seconds to reconnect: default 15)
/bccmd stopreconnect (stop trying to reconnect for now)
/bccmd relog <charname>
/bccmd version (show version)
/bc your text (send text)
/bc ToonName //command (send Command to ToonName)
/bca //command (send command to all Toons)

MQ2Eqbcs.exe - Eqbcs is a server that can be run as a console app on windows or *nix, and is the server software used to operate Eqbc.

Syntax

It takes one command line parameter, which is the port you want to bind to (default is 2112)
 
Control-C ends the program.

 

[bigdaddy]

Re: Jigs21 Compile V4.0

Thanks Jigs! You're awesome!

 

[Jigs21]

Re: Jigs21 Compile V4.0

MQ2Events - Ini-determined, event driven.

/event <load|delete <name>|settrigger <name> <trigger text>|setcommand <name> <command text>|list>
 
Variables:
EventArg1 these are set acording to last event triggered and correspond to #1# .. #9#
EventArg2 these are not cleared so you can have one event use #9# and once set it will stay set until another #9# is encountered.
EventArg3
EventArg4
EventArg5
EventArg6
EventArg7
EventArg8
EventArg9
ini file: MQ2Events_CharacterName.ini
[eventname]
trigger=trigger text
command=command to execute when triggered
 
ini example entries
[enrage]
trigger=|${Target.DisplayName}| has become ENRAGED#2#
command=/attack off
 
[relaytell]
trigger=#1# tells you, #2#
command=/tell relaytargetname ${EventArg1} told me, '${EventArg2.Mid[2,${Math.Calc[${EventArg2.Length}-2]}]}'
 
[group]
trigger=#1#To join the group, click on the 'FOLLOW' option, or 'DISBAND' to cancel.#2#
command=/timed ${Math.Calc[3+${Math.Rand[4]}].Int}s /keypress ctrl+i
 
[raid]
trigger=#1#To join the raid click the accept button in the raid window or type /raidaccept.#2#
command=/timed ${Math.Calc[3+${Math.Rand[4]}].Int}s /raidaccept

MQ2ExchangeItem - This plugin will allow you to exchange items or unequip items without having any inventory windows or bags opened. Will now allow exchanging items that are in main inventory slots, not just in bags.

Syntax

NOTE: If you use custombinds using shift, alt, or ctrl, and use /itemnotify to right click the item... ENSURE that you use the format: "/nomodkey /itemnotify <slotname> rightmouseup"
 
/exchange "item name" <slotname> - Swaps "item name" into <slotname>
/unequip <slotname> - Unequip any of the equipment slots
/exchange help - Gives a list of the commands available
/exchange help list - Gives a list of the equipment slot names
 
 
Slotname can be any of the standard named slots:
 
 
charm
leftear
head
face
rightear
 
neck
shoulder
arms
back
leftwrist
rightwrist
ranged
 
hand
mainhand
offhand
leftfinger
rightfinger
chest
leg
feet
waist
ammo
pack1 - pack8

MQ2Exactspeed - Speed hack

/speed #
 
ie, /speed 300 => ${Me.Speed}==300

MQ2FPS - This plugin changes the frames per second of the Everquest screen when it is in focus and when it is in the background. This is the same as EQPlayNice, only more macro friendly.

SYNTAX for MQ2FPS

MQ2Fakechat - Cause fake chat to be displayed in your windows from a specific person in a specific channel.

Syntax:

/command personname what they will be saying
 
/fakeooc 
/fakeshout 
/fakeauction 
/faketell 
/fakesay 
/fakeraid 
/fakegroup 
/fakeguild

MQ2Fakelink - Fake links in channels of your choice. Enjoy.

SYNTAX for MQ2Fakelink

MQ2FeedMe - Food-handling plugin

Usage:

        /autodrink          -> Force manual drinking
        /autodrink 0        -> Turn off autodrinking
        /autodrink 3500     -> Set Level where plugin should drink
        /autofeed           -> Force manual feeding
        /autofeed 0         -> Turn off autofeeding
        /autofeed 3500      -> Set Level where plugin should eat

MQ2Instamem - Instantly memorize a spell and/or spell set.

/memspell "Spell name" gem#
/memset "Set name"

MQ2LinkDB - This plugin basically allows you to be a LinkBot. It stores links in a database and allows you to request a link to be posted. Make sure you type import the database with the "/link /import" command after getting ingame and unzipping the file in the right spot...see below.

SYNTAX for MQ2LinkDB

MQ2Melee - This plugin activates common combat abilities at logical times determined by the user.

SYNTAX for MQ2Melee

MQ2Missing - provides a list comparing who is not in zone/raid/dz/task to one other one of those...ie, who is inzone but not raid, inzone but not task, in task but not inzone, etc.

/missing choice1 choice2 - compare choice 1 and choice 2
/missing - Shows plugin help

MQ2MoveUtils - This plugin performs basic monotonous movement tasks.

SYNTAX for MQ2MoveUtils

MQ2NetBots - Provides Linked MQ2EQBC Client way to exchange/share statistics/status to others and make those informations available in TLO for macro scripters and HUD designers.

Syntax:

/netbots on/off
/netbots grab=on/off
/netbots send=on/off
 
grab: listen to others status on the network.
send: broadcast your status over the network.

MQ2NetHeal -

Syntax:

/netheal on|off|auto :Turn On/Off Healing Informations
/netheal grab=on|off|auto :Turn On/Off Gather of Healing Informations.
/netheal send=on|off|auto :Turn On/Off Broadcasting of Healing Informations.
/netheal hot timems list :Use for macro only.
/netheal da timems list :Use for macro only.
 
/netcure on|off|auto :Turn On/Off Watching for HarmFull Effects.
/netcure audio=on|off|auto :Turn On/Off Report Audio Sound.
/netcure popup=on|off|auto :Turn On/Off Report Popup Style.
/netcure quiet=on|off|auto :Turn On/Off Report to MQ2 Window.
 
/networst on|off|auto :Turn On/Off Watching for Group Health.
/networst audio=on|off|auto :Turn On/Off Report Audio Sound.
/networst popup=on|off|auto :Turn On/Off Report Popup Style.
/networst quiet=on|off|auto :Turn On/Off Report to MQ2 Window.
 
/worsttarget query :Target Worst One if Any Matching Query.
/worstcycle query :Cycle to Next Worst One if Any Matching Query.

TLO's and other information:

NETCURE:
${NetCure[X]} string return list of harmfull effects.
${NetCure[X].Detrimentals} int return # of Detrimental Spells.
${NetCure[X].Counters} int return # of Counters.
${NetCure[X].Cursed} int return # of Curse Counters.
${NetCure[X].Diseased} int return # of Disease Counters.
${NetCure[X].Poisoned} int return # of Poison Counters.
${NetCure[X].EnduDrain} int return # of Endurance Drain Per Tick.
${NetCure[X].LifeDrain} int return # of Life Drain Per Tick.
${NetCure[X].ManaDrain int return # of Mana Drain Per Tick
${NetCure[X].Blinded} int return # Blind Spells.
${NetCure[X].CastingLevel} int return # Reducing Casting Level.
${NetCure[X].Charmed} int return # Charm Spells.
${NetCure[X].Feared} int return # Fear Spells.
${NetCure[X].Healing} int return # Reducing Healing Effectiveness.
${NetCure[X].Invulnerable} int return # Invulnerability Spells
${NetCure[X].Mesmerized} int return # Memsmerize Spells.
${NetCure[X].Resistance} int return # Resist Debuff Spells.
${NetCure[X].Rooted} int return # Root Spells.
${NetCure[X].Silenced) int return # Silence Spells.
${NetCure[X].Slowed} int return # Slow Spells.	
${NetCure[X].Snared} int return # Snare Spells.
${NetCure[X].SpellCost} int return # Affecting Spell Mana Cost.
${NetCure[X].SpellSlowed} int return # Slowing Casting Speed.
${NetCure[X].SpellDamage} int return # Reducing Spell Damage.
${NetCure[X].Trigger} int return # That Trigger Something.
 
*Where X could be (self,myself,pet,warder,spellid,spellidlist);
 
NETWORST:
${NetWorst.Affects} int return Last # of People in Query Range.
${NetWorst.Average} float return HP Average People in Last Query.
${NetWorst.Counter) int return Last # of People Matching Last Query.
${NetWorst.Members} string return People SpawnID List of Last Query.
${NetWorst.Request[X]} int return # of People Matching That Query.
 
*Where X is the Query to Perform. 
*Valid Keywords are: radius,hp,pet,pc,group,self,fd,da,hot,war,clr,pal,rng,shd,dru,mnk,brd,rog,shm,nec,wiz,mag,enc,bst,ber,all or #ID#.
*hp,war,clr,pal,rng,shd,dru,mnk,brd,rog,shm,nec,wiz,mag,enc,bst,ber,all could be use with % ie: shm80 war60.
*order you pass paramters might influence query results.
 
NETHEAL:
${NetHeal[X].Name} or ${NetHeal.Name[Y]} string return Name.
${NetHeal[X].ID} or ${NetHeal.ID[Y]} int return SpawnID.
${NetHeal[X].Distance} or ${NetHeal.Distance[Y]} float return Distance.
${NetHeal[X].PctHPs} or ${NetHeal.PctHPs[Y]} int return PctHPs.
${NetHeal[X].Pet} or ${NetHeal.Pet[Y]} bool return This is a Pet?
${NetHeal[X].Class} or ${NetHeal.Class[Y]} int return Class.
${NetHeal[X].Feign} or ${NetHeal.Feign[Y]} bool return This is Feign Class?
${NetHeal[X].Canni} or ${NetHeal.Canni[Y]} bool return This is Cannibalize Class?
${NetHeal[X].Spawn} or ${NetHeal.Spawn[Y]} int return Spawn.
${NetHeal[X].da} or ${NetHeal.da[Y]} int return da timer left.
${NetHeal[X].hot} or ${NetHeal.hot[Y]} int return hot timer left.
${NetHeal[X].ttl} or ${NetHeal.ttl[Y]} int return 60000.
${NetHeal[X].Updated} or ${NetHeal.Updated[Y]} int return how old is This?
 
*Where X Could be ID or Name.
*Where Y is a Numerical Indice on Last ${NetWorst.Request} Enabling This to Act as Some Kind of Array.
 
IS:
${isNPC[ID]} bool return true when Spawn[ID] is a NPC.
${isNPCPET[ID]} bool return true when Spawn[ID] is a PET and Owner is a NPC.
${isNPCCORPSE[ID]} bool return true when Spawn[ID] is a CORPSE and Owner is a NPC.
${isPC[ID]} bool return true when Spawn[ID] is a PC.
${isPCPET[ID]} bool return true when Spawn[ID] is a PET and Owner is a PC.
${isPCCORPSE[ID]} bool return true when Spawn[ID] is a CORPSE and Owner is a PC.

MQ2OTD - Hud driven directional arrow pointing towards target.

Commands available:

/otd (displays available options)
/otd moveto x y (centers the output at x,y - and stores in ini file)
/otd moveby x y (Like moveto, but moves from where it is by x and y)
/otd on (turns on output)
/otd off (turns off output)
/otd range (toggles numeric range display)
/otd reload (reloads ini file)
/otd drawtight (default off - displays range very close to direction pointer)
/otd getloc (displays current x,y location)

MQ2PacketAPI - Passive plugin that creates the API needed for some packet plugins.

MQ2Pax - Packet hacks all crunched together.

/open - Open targeted chest/object
/gank - pick up item that has been targeted with /itemtarget
/hailtarget - hail your target from anywhere inzone.
/saytarget - say anything to your target from inzone.
/sumcorpse - Summons targetted corpse to your feet. (Must have consent)

MQ2Piggyzone - Gate/Zone/Chainshift/Fade/Succor

/zone qeynos2 - takes you to North Qeynos if it knows a path
/zone force qeynos - takes you directly to North Qeynos and crashes if you aren't adjacent
/findpath qeynos2 - displays the path to North Qeynos
/findpath North - displays all of the zonenames whose long name contains "North"
/fade - zones you to the zone you are already in (even if its instanced)
/gate - Returns you to your bind point
/succor - fades you out, then back in at the succor point

MQ2PreventSpeed - This plugin eliminates all changes to your speed, positive or negative.

Syntax

/dspeed - Toggle PreventSpeed on/off

MQ2Radar

SYNTAX FOR MQ2RADAR

MQ2Randomstuff - Pulls random text strings from ini file and assigns them to ${RandomStuff}

Commands:
/randomstuff [section] - Picks a random key from [section] of the INI file, to be returned by ${RandomStuff}

So.. with an ini file like this

[hybrids]
hybrid1=ranger
hybrid2=shadow knight
hybrid3=paladin
hybrid4=bard
hybrid5=beastlord
[incoming]
incoming1=Holy shit! %t incoming!
incoming2=%t is a big nasty monster! kill it!
incoming3=%t said he hates gnomes...then again who doesn't?
incoming4=Look, over in the bushes! It's %t!
[blackorwhite]
bw1=black
bw2=white

You could do

/multiline ; /randomstuff incoming ; /gsay ${RandomStuff}

to trigger a random incoming message. Or maybe

/multiline ; /randomstuff hybrid ; /raidsay some ${RandomStuff} needs to kite that add!

MQ2Rez - Plugin form of Wait4Rez.mac.

/rez               -> displays settings
/rez accept on|off -> Toggle auto-accepting rezbox
/rez spawn  on|off -> Toggles going to bind point after death
/rez pct # -> Autoaccepts rezes only if they are higher than # percent
/rez loot on|off -> Toggle looting corpse when opened and when rezzed
/rez help

/rezzme -- Immediately respawn yourself without a rez. You will *not* regain any experience. You will also *not* automatically loot out, so you'll need to manually open your corpse.

 

[Jigs21]

Re: Jigs21 Compile V4.0

MQ2Rwarp - Warps.

Syntax

/zwarp <distance> - Warps you a specified distance on the Z axis.
/exactloc - Gives you a high-precision /loc readout
/waypoint - Sets a waypoint for future /warping
/warp <succor|last|loc <y x z>|dir <dist>|target|wp name>

MQ2Size - This plugin allows you to change the size of characters on your screen. (client side only)

Syntax

/size 1-98
 
*WARNING* Do not go higher than /size 98. If you do, you'll have to delete your character file and do a complete file check with the EQ patcher.

MQ2Slave

Inspired by Fibby's MQ2MasterMind. MQ2Mastermind was good because it let me control my bots, and have them run macros w/o actually looking at that screen and manually fiddle with buttons. I found I would also have situations where I'd want friends to control my toons, for situations where one of us would fall asleep etc...but MQ2MasterMind only allows 1 controller.
 
The next problem is each time the bot is run, you need to resend the password. When someone sends a blank password, like many do in eq, it would accept it. Not good for a random person checking to see if you've zoned sees "I will do you bidding"...
 
I made MQ2Slave to address all these issues.
To start it, type /plugin mq2slave
To add someone named "Mrmath" to the master list, type /addmaster mrmath
To remove "Mrmath" from the master list, you need to type /remmaster Mrmath
*Note* removing masters is case sensitive, adding them is not.
That is all there is to it, if any of the masters in the .ini file send the slave a tell starting with / then the slave will do it.
 
The list of masters is saved in the MQ2Slave.ini file which is completely customized the first time you run MQ2Slave and is edited via eq (you don't have to open the .ini file).

MQ2SpellHotkeys - allows a user to specify in an ini spell / hotkey combos

Usage

    /autohotkey < on | off | list <...> | reload | addchat <chatname> | remchat <chatname> | setpopups <...> | save  >
          /autohotkey list < all | state | chats | popups | hotkeys >
          /autohotkey setpopus < all | < NameOfPopUp > > < TRUE | FALSE >
Alias:    /ahk is the alias for /autohotkey

-on: turns auto hotkey on

-off: turns auto hotkey off

-reload: reloads all info from the user's .ini in the release folder

-list: show list usage
---all: list all information
---state: show autohotkey state
---chats: show all default chat channels
---popups: show pop up states
---hotkeys: show spell / hotkeys combo

-addchat <chatname>: adds specified chat to the default chats list

-remchat <chatname>: removes specified chat from the default chats list

-setpopups < all | NameOfPopUp > < TRUE | FALSE >
---all: sets all popups
---NameOfPopUp: One of the categories such as OnHit or OnResist etc.

-save: saves the state (on or off) and default chats list to the .ini

Example INI

; Filename: hotkeys_Soandso_Innoruuk.ini
; In the Default section, the chat's must be labeled in order.
; Doesn't matter the physical placement, just the numbers without skipping.
; If there is no "chat" label at all, then any unformated hotkeys below will
; not be sent.
[Default]
Auto_on=TRUE
chat0=/g
chat1=/rs

; Next section is all boolean values for spell pop up reporting
; These are just what to pop up, DoPopUps must be enabled in the
; section for that spell to show pop ups.
[PopUps]
OnHit=TRUE
OnResist=TRUE
OnInterrupt=TRUE
OnOutOfRange=FALSE
OnWillNotHold=FALSE
OnWornOff=TRUE
; Popup messages enabled for resists and wear off messages only

; Here are the spell / hotkey combos
; The section heading [...] is the name of the spell.
; There are 3 different types: OnCast, OnHit, and OnResist
; There can be multiple messages for each category as long as no two have
; the same exact name. They all have to start with one of the 3 categories.
; One field can be DoPopUps which enables popup messages for any of the
; categories allowed in the PopUps section.  If not included it's assumed FALSE.
; Remember for items to use the name of the spell that will be casting.
[Turgur's Insects]
DoPopUps=TRUE
OnCast0=## I am casting Slow on < %t > ##
OnResist=## < %t > resisted Slow! HEAL MY FURRY BUTT!!! ##
OnHit=## I have SLOWED < %t > ##

[Petrifying Earth]
DoPopUps=TRUE
OnCast=## I am casting Root on < %t > ##
OnResist=## < %t > resisted ROOT! RUN SCREAM and SHOUT!! ##
OnHit=## I have ROOTED < %t > ##
OnInterrupt=## ROOT has been interrupted!##

[Breath of Ultor]
DoPopUps=TRUE
OnCast=## I am casting Breath of Ultor on < %t > ##
OnHit=## I have Casted Breath of Ultor on < %t > ##

[Bane]
DoPopUps=TRUE
OnCast=## I am casting Bane on < %t > ##
OnResist=## < %t > resisted Bane! ##
OnHit=## I have BANED < %t > ##

[Tears of Saryrn]
OnCast=I am casting Tears of Saryrn on < %t >!
OnResist=## < %t > Tears of Saryrn! ##

[Malos]
DoPopUps=TRUE
OnCast=## I am casting Malos on < %t > ##
OnResist=## < %t > resisted Malos! ##
OnHit=## I have MALOSED < %t > ##
OnInterrupt=## MALOS has been interrupted!##

MQ2SpellSearch - Look up spells by their emote or name with search command

   Features:
     - Adds /spellsearch command that you can use to lookup a spell
      by its name, or its casted emote text. Search is done on spell
      data in active memory. This is an interpreter not a dictionary.
    - Spells are searched for by an invoked thread, which on most
      machines helps avoid the 'freeze until search complete' syndrome
    - The dedicated window mode uses the default chatbox, no MQUI files needed

   Setup:
     - You need to setup your Settings section of your MQ2SpellSearch.ini
      or the plugin will not give you more than 1 match ever. Ex:
      [Settings]
       UseWnd=1
       MaxResults=15
    - The window is NOT shown by default at all. When you use a
      /spellsearch, the window will be visible.
      (Press ESC to hide it, output is not lost)
    - Window settings are saved per server per char name in the ini,
      only when the window class is destroyed. ie: game process does
      a OnCleanUI() or plugin is unloaded.

When using the separate window, it looks like this:

MQ2Switch - Activate a switch/door inzone.

/switch door#

MQ2Targets - Advanced version of the older MQ2Spawnmaster. Watches for new spawns inzone and can react in various ways.

SYNTAX for MQ2Targets

MQ2TimeStamp - This plugin inserts a timestamp into incoming chat.

Syntax

/timestamp [ help| on | off | reload | default | format <format> | loc <0|1> | maxlen <length> ]
Will toggle on/off with no arguments
help - displays usage information
on/off - enables/disables timestamps
reload - reloads the ini file
default - resets your format to default(only changeable via ini)
format - sets your timestamp format to <format>
loc - sets timestamp location: 0-append, 1-prepend
maxlen - sets the maximum length of parsed timestamp.

MQ2Tracking - This plugin will provide a similar tracking window to the one used by native tracking characters.

SYNTAX for MQ2Tracking

MQ2Twist - This plugin automates the twisting of bard songs.
SYNTAX for MQ2Twist

MQ2WorkingAssist - Warp to range enough to assist, so that you can assist from anywhere inzone. Replaces the old assist with the new warping one.

With someone targeted:
/assist

MQ2XPTracker

Usage:
/xptracker - Display time tracking was started.
/xptracker reset - Reset all events and begin tracking as if plugin was just loaded
/xptracker total - Display total gains since tracking start
/xptracker quiet - Toggle output of tracking messages
/xpevents - list the events/timestamps of the events we've tracked
/xpevents [#] - lists the events tracked in the past [#] seconds
/xpaverage - lists the average (mean) xp per-kill

 

[fierymomof2]

Re: Jigs21 Compile V4.0

Thanks Jigs! RL always comes first, as it should. Great job! Was jonesing for my map during raid tonight LOL

 

[Fryed]

Re: Jigs21 Compile V4.0

Nice job Jigs. No need to apologize, we appreciate the common sense compiles.

 

[VillageIdiot]

Re: Jigs21 Compile V4.0

Nice job jigs on getting this back up! You rock !!!

FYI,

I keep CTD when using my map.

Today i zoned into Vxed and opened map. Saw myself at entrance to zone and 2 more of me on other side of map then BAM CTD.

Then loaded back up went in and could use map no prob, Later i head to PoT and try to open map and BAM CTD. Just thought i'd let ya know

*edit,

OHh yeah only extra plugins i loaded where;
mq2docrack
mq2moveutils
mq2twist

 

[Zero0003]

Re: Jigs21 Compile V4.0

Its known. mq2 know about it just waiting for one of them to wake up for a new source

 

[Lokista]

Re: Jigs21 Compile V4.0

Plain and simple, dude you rock! Thanks for the new compile!

 

[israrus]

Re: Jigs21 Compile V4.0

Multiple names around my chars on map and CTD each 10 mins average on both comps i use.

And thx for you job =).

 

[Bitstormy]

Re: Jigs21 Compile V4.0

Hiyas, Villageidiot, have you got working docracks as i use the hide one for my rogue, mine say they are out of date etc. maybe there arent any updated ones posted yet, but i have a red cent coming your way jigs. I hope you guys that work all this stuff out for us realise how much its appreciated. Thank you....

 

[VillageIdiot]

Re: Jigs21 Compile V4.0

No i don't have an updated docrack. I just loaded it hoping it was included. No worries though i'm sure it will be soon. Give the guy a few days to get the bugs all worked out and the other goodies added, he always comes through!!!

I'd redcent ya jigs but says i don't have rep

 

[dmeyer6743]

Re: Jigs21 Compile V4.0

New Source out now, July 26 2007 13:50:52 (MQ2-20070726).

 

[unity0110]

Re: Jigs21 Compile V4.0

Multiple names around my chars on map and CTD each 10 mins average on both comps i use.

And thx for you job =).

This is fixed in the MQ2-20070726 zip

 

[Jigs21]

Re: Jigs21 Compile V4.0

I am working on the update now.

 

[Jigs21]

Re: Jigs21 Compile V4.0

I have updated the zips to current version of (MQ2-20070726).

I added docrack ini with updated offsets to the compile.

Enjoy.

 

[VillageIdiot]

Re: Jigs21 Compile V4.1

Thanks jigs! you rock~!

was the uberspeed plugin (i know thats now the name) , but was that part of the packet nerf? Can't remember.

 

[Siddin]

Re: Jigs21 Compile V4.1

SuperDuperReallyGhettoSpeed?
I think that one might still work

 

[VillageIdiot]

Re: Jigs21 Compile V4.1

i just want one so i can pretty much run bard speed indoors. 69.1's would be great if i could outrun the damn spiders :P

 

[Siddin]

Re: Jigs21 Compile V4.1

just get the run aa's you'll outrun them without a problem (and be asking them to sow themselves)
But as for the plugin, we'd have to look for the source again, not to mention redo the timing on it since it would ld quite a lot of people (including me which is why i made other ones)

 

[Cpt_Cam]

Re: Jigs21 Compile V4.1

anyone else having issues with mq2reward? doesn't crash, just doesn't appear to werk :P

 

[dmeyer6743]

Re: Jigs21 Compile V4.1

Apparently theres something wrong with the cast plugin (my best guess at least) because when I try to use my clicky buttons (/cast "item name") it says you do not have this spell memorized.

Yes of course I have exchange loaded too...

I think its gotta be mq2cast thats bugged.

 

[dmeyer6743]

Re: Jigs21 Compile V4.1

Actually, nevermind... I rebooted and clicky buttons / mq2cast are working fine now.

 

[Mandrake]

Re: Jigs21 Compile V4.1

No Docrack ini in the zips

 

[VillageIdiot]

Re: Jigs21 Compile V4.1

docrack worked for me just fine

 

[dmeyer6743]

Re: Jigs21 Compile V4.1

With 4.1 Map still showing multiples of myself and when and only when I click one of my dots on my map it crashes.

I know: Patient: Doc, it hurts when I raise my hand over my head. Doctor: Don't raise your hand over your head!

Still annoying :P

 

[Beardog]

Re: Jigs21 Compile V4.1

With 4.1 Map still showing multiples of myself and when and only when I click one of my dots on my map it crashes.

Seems they had a small opps at MQ central,, they released a MQ2-20070726a.zip with the following message

actually check in the map fix

seems they forgot the map fix in the MQ2-20070726.zip release..

 

[Jigs21]

Re: Jigs21 Compile V4.1

No Docrack ini in the zips

There is.

Also working on the update for the map changes, will have it posted soon.

 

[Jigs21]

Re: Jigs21 Compile V4.1

Alright, well I tried to compile this MQ2-20070726a.zip seems they have screwed something up inside of it that won't allow me to compile our plugins in it. So in other words we are going to have to wait for a b.zip for the hopeful fix with macroquest its self and the map fix.

 

[bigdaddy]

Re: Jigs21 Compile V4.1

I'm getting a lot of crashes too.. Just had 6 boxes crash at exactly the same time.. Scared me.. lol... (thought i was banned while just standing still!) I logged em all back in fine though..

 

[fearthejourney]

Re: Jigs21 Compile V4.1

I'm getting a lot of crashes too.. Just had 6 boxes crash at exactly the same time.. Scared me.. lol... (thought i was banned while just standing still!) I logged em all back in fine though..

Been having a lot of crashes and was not going to say anything about it. But I had to comment on bigdaddy. 6 boxes??? I have heard of 2 boxing and have done it on my system with my fiances account as the 2nd one. But why the heck would you 6 box? and how do you afford it? lol

 

[Siddin]

Re: Jigs21 Compile V4.1

BYOG ftw! (bring your own group aka buy your own group) I 6-box, also have another group of 6 if i want to pay for it. I can run 6 on my main computer and another 6 on the other quite easilly.
Its all about custom made macros as you need to know what each toon is going to do all the time.

 

[bigdaddy]

Re: Jigs21 Compile V4.1

Yeah, it's fun once you get your macros all sorted out and tweaked.. lol... BUT... you'll pull your hair out, throw stuff, punch monitor etc.. while you're trying to get all the macros working...

 

[Blueice22]

Re: Jigs21 Compile V4.1

[UltraVision]
Description="Ultra-vision"
Version="2007.07.19"
Address0=468506
Normal0="74 0A"
Crack0="90 90"

 

[Jigs21]

New zip. Everything should be back to normal.

 

[warisgood]

Could you please put the Plugin MQ2Targets in the zip or up for download?

Thanks, Your compiles are always appreciated!

 

[tagger]

Re: Jigs21 Compile V4.1

Been having a lot of crashes and was not going to say anything about it. But I had to comment on bigdaddy. 6 boxes??? I have heard of 2 boxing and have done it on my system with my fiances account as the 2nd one. But why the heck would you 6 box? and how do you afford it? lol

I run 5 accounts on 3 boxes I thought that was the norm.

 

[Fryed]

Thanks for the update Jigs.