Guide - KissAssist Instructions & Settings Info (1 Viewer)

THIS MANUAL IS OUT OF DATE!

Please use the manual found at

for the most up to date version.

THIS MANUAL IS OUT OF DATE!

/mac kissassist assist Bob
/mac kissassist assist Bob 98
/mac kissassist puller BobTank
/mac kissassist tank

/mac kissassist ini kissassist_Name_IceNukes.ini

/mac kissassist ini kissassist_Name_IceNukes.ini assist Tankname 98

[cityofbronze]
MobsToPull=grendlaen,braxi,selyrah,oashim,bloodclaw,strangleweed
MobsToIgnore=a sentry stone,Leaf Pile,Tyzen,Faltar,A Rabid Selyrah
MobsToBurn=List up to 10 mobs. Use full names i.e. Deathsqueak,A_Raging_Braxi,Guggles or NULL
MezImmune=List up to 10 mobs. Use full names i.e. a green snake,a blue tiger,a wide eye ooze or NULL

• Role=Assist - Default role of assisting Main Tank on mobs.
• Role=Tank - Sets up tanking feature and will target and attack any aggressive mob that comes into defined melee range. Target (or declare) yourself as MA.
• Role=PetTank - This role allows for a pet class (Mage/Necromancer/Beastlord) to have their pet tank.
• Role=PullerPetTank - This role allows for a pet class (Mage/Necromancer/Beastlord) to BOTH pull and have their pet tank.
• Role=Puller - This role basically duplicates the oldie but goldie puller.mac. It will pull mobs within a certain radius back to camp for your party to kill. Target Main Assist for this role.
• Role=PullerTank - This role combines pulling and tanking. The character will pull mobs back to camp then engage them when within defined melee distance. Target your self for Main Assist with this role.
• Role=Hunter - This role duplicates the old hunter mac. It will run your character around a zone and hunt any or predefined mobs with the pull radius. Target yourself for Main Assist with this role. ** This setting will ignore any Mob HP % you may have defined in your DPS section in the INI **
• Role=HunterPetTank - This role duplicates the old hunter mac. This role allows for a pet class (Mage/Necromancer/Beastlord) to have their pet tank. It will run your character around a zone and hunt any or predefined mobs with the pull radius.
• Role=Petassist - This is mainly for Pallys, Rangers, Beastlords and SKs asssiting Mage pets tanking . It turns off melee so they just send in pets and cast.

• In the DPS section, you'll want to align your spells in order in which they cast. They don't need to be in order, but it helps to visually see which spells are going to be cast first and which spells will follow.
• If using DPSOn=1, Kissassist will cast each spell starting when the Mob Health is less than the Spell/AA's MobHealth% and pausing for the DPSInterval timer that starts when the fist spell starts to cast and will pause casting until the timer ends. Once the Mob's Health gets below the next Spell/AA's MobHealth% number that Spell/AA is added to the rotation making a snowball of damage that gets bigger and bigger as more Spell/AA's are added to the rotation. Dot's will be reapplied when they drop off the target. If you have an order that you want the Spell/AA's to cast in, you must use a different MobHealth% for each. An example would be first spell at 99 next at 98 then later in the rotation you might have a 76, 75, 74. once the target gets below 74 all the spells will cast in order from highest MobHealth% to the lowest tying to recast a spell if it gets resisted or interrupted as to not break the sequence. --good for debuff stacking using the |Once tag. If you use spells with the %health 98,98,98 70,70 and 30,30 you will not know what order it will pick, the 2nd or 3rd spell with the same %health may cast first. (Further testing needs to be done on how many times a spell gets resisted/interrupted before it moves on to the next.)
• If using DPSOn=2, Kissassist will cast in a sequential order, a chain of Spell/AAs starting with the highest MobHealth% to the lowest, with no casting delay/pause. As soon as the chain of casting starts, the DPSInterval timer starts. If it takes 12 seconds to cast all the spells in the chain and the DPSInterval is set to 10 you will see no delay in recasting the chain. If DPSInterval is set to 20, there will be an 8 second delay/pause before the chain will recast. If the Mob dies in the middle of a chain, the chain starts over for the new target. If the |Once tag is used with a Spell/AA, it will no longer be cast and will be skipped if the chain is cast a second or third time on the same target. If the target is new, the Spell/AA will cast again, but only once for the new target. If Dot's are used in the chain and they are still ticking on the target there will be a delay in the chain as Kiss checks target for the Dot's and if present will skip it, before moving to the next Spell/AA, but if the Dot ends it will be recast as soon as the current Spell/AA finishes casting, causing the order to be out of place when the chain is cast 2 or more times.

Cond1=!${InvSlot[mainhand].Item.Name.Equal[Conflagrant Bastard Sword]} && ${SpawnCount[NPC radius 20 zradius 10 targetable]}>=2
Cond2=!${InvSlot[mainhand].Item.Name.Equal[Conflagrant Great Sword]} && ${SpawnCount[NPC radius 20 zradius 10 targetable]}<=1 && ${SpawnCount[NPC radius 20 zradius 10 targetable named]}==0

• Any character using KissAssist now writes all current and blocked buffs to the kissassist_buffs.ini file. KissAssist scans this file and compares it with the buffs that are listed in the character's Buffs section of their ini file. If another character is missing a buff, and it stacks, they will cast it on that character.
• This addition works only with characters boxed on the same computer because it writes to a central ini file in the macro folder. The feature writes and scans every 60 seconds so there should not be any noticeable lag. The file is self cleaning so you won't end up with a 30 mb ini file.
• To allow other macros to work see the Extras section!

• KissAssist heal feature works by watching each group members health and heals the the member at lowest health.
• Kissassist will automatically detect single target and group spells and cast them accordingly
• Kiss will treat Targeted AE heals like Shaman line Spiritual Surge as a Single Heal spell with the MA|Me|Pet tag

• Dead=Your character has died.
• GM=A GM or Guide has entered your zone (LOOKOUT!)
• Level=You have just dinged the defined level you wanted to be alerted to. Format is: Level|#
• Named=Your group just engaged a Named Mob . . . Perhaps you should monitor this fight.
• Leftgroup=Someone in your group has left, maybe they went LD or crashed???? Check on it.
• Tells=Someone sent you a tell. You may want to respond.

• /setdps Gem# Gem# Gem# Gem# - write spell in gem slots to DPS section of ini file
• /setbuffs
• /setheals

/setdps 1 3 4 5
[MQ2] Set DPS 1 3 4 5
[MQ2] This command will write over current DPS settings
[MQ2] WRITING: DPS1=Sha's Legacy|95
[MQ2] WRITING: DPS2=Binaesa Blood|90
[MQ2] WRITING: DPS3=Frostrift Lance|85
[MQ2] WRITING: DPS4=Rotsil's Bite|80

• /setdps spell 1 - Will add the spell in Gem 1. Valid selections are gems 1-13
• /setdps item - Will add whatever item you have on your cursor.
• /setdps disc 1 - Will add the disc in slot 1 of your Combat Ability window. Valid selections are slots 1-8
• /setdps aa 611 - will add the AA, Battle Leap. AA numbers can be found in the AA Windows

[DPS]
DPSOn=2
DPSSkip=1
DPSInterval=2
DPS1=Cry Carnage|98
DPS2=Open Wound|99|Once
DPS3=Bubbling Rage|0
DPS4=Phantom Assailant|0
DPS5=Battle Stomp|98
DPS6=Frenzy|95
DPS7=Banestrike|90
DPS8=Juggernaut Surge|85|Me
DPS9=Demolishing Volley|83
DPS10=Demolishing Frenzy|81
DPS11=Axe of Numicia|79
DPS12=Binding Axe|86
DPS13=Dichotomic Rage|92|Mob
DPS14=NULL
DPS15=NULL

[Burn]
BurnText=Decepticons Attack
Burn1=Reckless Abandon
Burn2=Silent Strikes
Burn3=Fundament: Third Spire Of Savagery
Burn4=Distraction Attack
Burn5=NULL
Burn6=NULL
Burn7=NULL
Burn8=NULL
Burn9=NULL
Burn10=NULL
Burn11=NULL
Burn12=NULL
Burn13=NULL
Burn14=NULL
Burn15=NULL
UseTribute=0
BurnAllNamed=0

[AE]
AEOn=1
AERadius=45
AE1=Rampage|1|Single
AE2=Vicious Cyclone|1|Single
AE3=Blinding Fury|3|Me
AE4=Battle Cry of the Mastruq|3
AE5=Distraction Attack|3
AE6=Reckless Abandon|3
AE7=Silent Strikes|3
AE8=Fundament: Third Spire Of Savagery|3
AE9=NULL
AE10=NULL
AE11=NULL
AE12=NULL
AE13=NULL
AE14=NULL
AE15=NULL

 /declare Burn[10]                            string      outer

[Burn]
BurnText=Decepticons Attack
BurnAllNamed=0
Burn1=Frenzied Burnout|pet
Burn2=Host of the Elements|Mob
Burn3=First Spire|Me
Burn4=Servant of Ro|Mob
Burn5=Ruthless Servant|mob
Burn6=NULL
Burn7=NULL
Burn8=NULL
Burn9=NULL
Burn10=NULL

Q: Will my KissAssist characters buff me if I use another macro?
A: Yes they will, with the kissassistbuffs.inc include file.

Instructions to use this feature in other macros
1. Add this line to the top of your macro with any other include files.

• #include kissassistbuffs.inc

2. Add this line the your the main loop of your macro

• /call WriteBuffs

3. Make sure you have kissassistbuffs.inc in your macro folder. This is included with our compile.

Click to expand...

ctaylor22 said:

There is only one place in kissassist where /doability sneak is located and it depends on AutoHide being turned on. AutoHide=1.

Click to expand...

[Melee]
AssistAt=98
MeleeOn=1
FaceMobOn=1
MeleeDistance=40
StickHow=behind
AutoFireOn=0
Autohide=0
UseMQ2Melee=1
TargetSwitchingOn=0
AutoHide=1

timothylnewsom said:

Folks I need help. im trying to figure out how to change targets during fights that the main mob goes inactive and adds need to be killed, specifically the new EW mission. When the main mob goes inactive my bots keep following him around trying to attack rather than following the chase toon (me). Sometimes they just stop and stand around doing nothing. I need to know how to get them to follow me for auras as well as switch to adds.
I found the /setbackoff, /switchnow, and /trackme commands but i'm not sure how to use them or if they're the ones I need.
I hope this is ok for this thread, if not I apologize.

Click to expand...

eqtrader74 said:

Add |MA tag to it. Group stuff will use healer as target unless you specify MA. You can add MA to heals/dps/buffs/burn entries. If it's not firing in heals (due to group avg health not matching) then put it in DPS and let the sham get aggro via heals.

DPS2=Roar of the Lion|100|MA

DPS4=Cloud of Renewal|95|MA|cond5

Cond5=!${Me.Song[Cloud of Renewal].ID}

Click to expand...

malech1983 said:

Just curious lads, Could you do an example of how to use item clickys?...Example would be the mage robe Cohort's Flameweaver robe has a nice pet clicky...How would you incorporate that into ini. Also, How would I go about setting the mage up to autocast Cauldron of Countless Goods everytime it becomes available? Thanks in advance!

Click to expand...

Buffs8=Velium Infused Charm of Security|Dual|Geomantra XXIII

DPS5=Cohort's Flameweaver Robe|95|Cond1

Cond1=${Target.Named}

downflag0=1
downshit0=/if (${Cast.Ready[Cauldron of Countless Goods]} && !${Me.Invis} && !${Me.Casting.ID} && !${Me.Moving} && ${MacroQuest.GameState.Equal[INGAME]} && !${Me.CombatState.Equal[COMBAT]})   /useitem Cauldron of Countless Goods

vsab said:

For items, you basically just do the same as you would for a spell. So for Buffs you would need to use the "dual" keyword.

INI:

Buffs8=Velium Infused Charm of Security|Dual|Geomantra XXIII

In DPS section I have:-

INI:

DPS5=Cohort's Flameweaver Robe|95|Cond1

In conditions, so it only fires on a named:

INI:

Cond1=${Target.Named}

For the cauldron I use MQ2Melee and add a "Downshit".

INI:

downflag0=1
downshit0=/if (${Cast.Ready[Cauldron of Countless Goods]} && !${Me.Invis} && !${Me.Casting.ID} && !${Me.Moving} && ${MacroQuest.GameState.Equal[INGAME]} && !${Me.CombatState.Equal[COMBAT]})   /useitem Cauldron of Countless Goods

I also use MQ2Cursor so it automatically destroys trash etc.

Click to expand...

etherealmist said:

I noticed an interesting issue while running KA on my Enchanter. It so happens that I was using Confound as my mez, and Confounding Constriction as one of my DPS options. Interestingly, I like to have my damage spells in my gems first and my mezzes lower on the spell bar, gem 4 was Confounding Constriction and gem 10 was Confound. This caused my Enchanter to use Confounding Constriction as his mez spell instead of Confound. Using /cast Confound would start casting Confounding Constriction, which made me realize why I was getting murdered so much! Nothing like seeing adds that should be mezzed all get dotted up ensuring a swift death for all!

I swapped the gem positions so that Confound occupied a spell gem location higher in view on the spell bar and lower in number than Confounding Constriction, gem 4 versus gem 10. As a result, Confound worked properly for mezzing, and Confounding Constriction still worked for DPSing. Using /cast Confound in position gem 4 correctly started to cast my mez.

This occurred while I was running KA, but my hunch is that this is more EQ2Cast related and is an edge case scenario where a mez and DPS spell -- two vastly different use case scenarios of spells -- had names encompassing one another. I do notice that MQ2Cast syntax is /casting instead of /cast, so not sure if this is just base EQ impeding me here, or if /cast is an alias to /casting and it is going through MQ2Cast.

Have others experienced this scenario before?
Is the root cause MQ2Cast or something else?
Any way to permanently remedy it, or is my workaround the main way for this?

Did some searching but didn't find anything related, but my search criteria could have been bad.

Click to expand...

Lovemate said:

Ok I have a question maybe it can be explained a little better in the DPS section it is about using the Ambush and once command together and what order they would go in?

I am trying to make a bandolier command so that when my puller tank pulls it will switch to the bow and arrow and when he is back in camp it will switch back to to his Dualwield arrangement

This is the DPS slots:
DPS1=Command:/bandolier activate Pulling|100|ambush|once|cond1
DPS2=Command:/bandolier activate DuelWield|100|once|cond2

and these are the conditions:
Cond1=${Target.Distance}>25
Cond2=${Target.Distance}<10

I would like to know if that seems right?
Thank You

Click to expand...