Plugin - MQ2TargetInfo (1 Viewer)

[Redbot]

Distance, line of sight and place holder info directly on target!

Instructions:
Simply load the plugin

/plugin mq2targetinfo

 

[ChatWithThisName]

MQ2TargetInfo
Distance, line of sight and place holder info directly on target window!

Read more about this resource...

 

[Redbot]

eqmule updated MQ2TargetInfo with a new update entry:

20181022

Added some more good stuff to mq2targetinfo - EqMule

Read the rest of this update entry...

 

[Thalondor]

I absolutely love the PH info on that. That's probably the best feature.

 

[levox]

How exactly does the PH feature work? Does it also apply to mobs that are roaming PH's? One example, Eldrig the Old in Skyfire (original bard epic) has a PH that spawns on the East wall and roams the entire zone, only way to find it is to slaughter the zone, or highsun every mob back to their spawn point and wait till one spawns back on the east wall, then camp spawn point. Something like finding the PH mobs in skyfire would be way better than killing everything or just highsunning every mob you see.

 

[Redbot]

eqmule updated MQ2TargetInfo with a new update entry:

New commands & configurable locations

• Added a /groupinfo command to hide/show buttons on the group window

Usage: /groupinfo help

• GroupWindow Button locations are now configurable in mq2targetinfo.ini

(plugin unload and reload is needed if you change button locations.)

Read the rest of this update entry...

 

[T3ST]

One thing ive noticed with the group window is that the button for "Disband" has a very small clickable portion of it, for me only the bottom of the button is actually clickable.

 

[MaxD]

One thing ive noticed with the group window is that the button for "Disband" has a very small clickable portion of it, for me only the bottom of the button is actually clickable.

If you make your group window bigger it should fix this problem

 

[eqmule]

I think the hitbox for the hotbutton might be bigger than it should and might overlap the disband button I will look into it.

 

[Redbot]

eqmule updated MQ2TargetInfo with a new update entry:

20181108

You can now set UsePerCharSettings=1 if you want that in MQ2TargetInfo.ini.
0 is default and means it reads settings from the [Default] section.
I realized that having per char settings is cumbersome if you have A LOT of chars.
The buttons on the groupwindow will only show when you are in a group now.
Except the Hotbutton which will always show unless you change its show/hide setting. see /groupinfo help for more in

Read the rest of this update entry...

 

[toppers]

is it possible to replace the buttons? 2 hot buttons in place of come to me

 

[eqmule]

It is not something I want to mess with, I could add a second hotbutton though. It will be possible to hide or show it.

 

[jamie75]

it seems to not be reading the ini since update. i have hotbar button hide and it is showing now

edit: figured it out. the new per character setting was disabled by default and my settings were under the character

 

[Redbot]

eqmule updated MQ2TargetInfo with a new update entry:

november updates

Nov 19 2018 by eqmule
- Added distance for targets on the Extended Target Window
You can control the feature by: /groupinfo show/hide extdistance
Because distance label needs a few pixels to display, u *might* need to make the window a bit wider,
it depends how many letters are in the mobs name that u fight.
- MQ2TargetInfo.ini now lets you customize what commands, texts and tooltips are executed/displayed for the Follow Me and Come To Me buttons
Default entries are:

...

Read the rest of this update entry...

 

[Redbot]

eqmule updated MQ2TargetInfo with a new update entry:

Nov 28 2018 by eqmule

Added "Follow Me" to the rightclick menu for the groupwindow. - idea cred: sl968
For this to work yuo need to have mq2eqbc loaded as well as mq2advpath and mq2targetinfo.
It will issue a /bct <toon> //afollow command to the toon you rightclicked on.

Read the rest of this update entry...

 

[Cellular07]

There are aspects that I like and dislike about this new window. Not sure if this is a hot topic or not, but figured I would chime in.

Is there someone that I can talk to about modification to this window/plugin? I know the creator mentioned not being a "XML" guy and did his best to accommodate all, just want to somehow perfect it. Awesome work, i def. can't do it. Just want to tweak and I do not think the configure settings will accomplish what I am trying to do.

Likes
- Distance, LoS, Target Details, Group Distance (although it somehow disappeared)

Dislikes
- Changed the size, positioning and functionality of my UI (Drakah TKing something).
- The UI background for my Target and HoTT used to be transparent, but since this update it forced it to have a black box background.
- The background sizeable window has to be a specific Y (CY) length to not overlay overlay my group window. under the mimic/come/follow buttons, still needs "extra space" to not overlay
- Can I remove the border used on the background sized window?

Unknown
- move, follow, mimic commands. Not sure what they are or why they are used.

 

[eqmule]

Your UI looks a bit like the Melee UI that has settings preconfigured in the mq2targetinfo.ini you should copy those and adjust accordingly.
From what I can tell your UI should be able to be properly configured by editing the ini. Use /groupinfo reload to see changes after u save the ini. EverQuest saves window sizes and position when you /camp I don’t change those at all.

Here is what it should look like when properly configured in the ini:

 

[Cellular07]

Your UI looks a bit like the Melee UI that has settings preconfigured in the mq2targetinfo.ini you should copy those and adjust accordingly.
From what I can tell your UI should be able to be properly configured by editing the ini. Use /groupinfo reload to see changes after u save the ini. EverQuest saves window sizes and position when you /camp I don’t change those at all.

Here is what it should look like when properly configured in the ini:
View attachment 15377

Oh, wow! That’s exactly how I would try to make it look. I will give it a go in a bit and let you know!

Thanks for the response

 

[Cellular07]

Is there a write-up or instruction somewhere as to what these coordinate instructions mean? I can't seem to figure it out via trial and error.

I.e.
GroupDistanceLoc=a,b,c,d

Where
a=?
b=?
c=?
d=Distance from right edge of group window

 

[eqmule]

top
bottom
left
right
It’s important to adjust them correctly because otherwise they will overlap other elements.
It’s trial and error for me as well, I change a number, save the ini, /groupinfo reload
Rinse and repeat until you get one control right then do next...

 

[Cellular07]

I think I am starting to figure it out. See picture. correct?

 

[eqmule]

Whatever works is correct

 

[IRKodama]

Is is possible to break off the new group buttons into a separate plugin or provide a way to disable all group features permanently? Having those setting reactive each time the plugin is update is beyond annoying.

With that said, I LOVE the Target Info this plug provides!

~IRKodama

 

[Cellular07]

I am getting closer. But struggling to get this to work as intended. Below are my settings.

[UI_Drakah]
DynamicUI=1
UseGroupLayoutBox=0
GroupDistanceLoc=0,13,70,0
ComeToMeLoc=40,0,0,40
FollowMeLoc=40,0,42,82
MimicMeLoc=40,0,84,124
HotButton0Loc=40,0,126,166
HotButton1Loc=40,0,168,208
HotButton2Loc=40,0,210,250
TargetInfoAnchoredToRight=0
TargetInfoLoc=0,13,0,0
TargetDistanceLoc=0,13,0,0
UseExtLayoutBox=0
ExtDistanceLoc=0,-20,70,0

And Picture..

 

[eqmule]

I’ll download that UI tomorrow and will paste my settings for it, but I can already tell u that DynamicUI should be 0.
Hotbutton size is a EverQuest setting u need to find hotbutton window 9 and right click it to set it’s size. This should also make your buttons smaller/bigger in theory.

Changing the transparency is a bug, I will make a setting for it.

Also the ini file has a section called [UI_Melee]
That section is probably mostly correct for your Group Window as well, cause they look exactly the same to me.

 

[eqmule]

Is is possible to break off the new group buttons into a separate plugin or provide a way to disable all group features permanently? Having those setting reactive each time the plugin is update is beyond annoying.

With that said, I LOVE the Target Info this plug provides!

~IRKodama

No that’s not possible, right click your group window on one of your group members and make sure you uncheck whatever stuff you want to hide. This is a new plugin, when I get feedback about bugs I will make changes. Sometimes those changes will break old settings, like last time when I had to rewrite the ini and u lost your old settings.
Sure that is annoying I agree, but to a lot of people with custom UIs the alternative of them not having the new ini settings available would have been annoying to.

Having said that, I don’t expect to having to change the ini settings again. So whatever u set the show/hide to now should stick for the foreseeable future.

Also, here is the thing about the group buttons and group member distance... once you get used to just quickly being able to see how far away everyone in group is from you and not having to alt tab over when they get stuck in a tree but simply just click the Come To Me button, or the next time you want everyone in group to hail the same npc as u and you just click Mimic Me and they all say after you, you will understand how great those buttons are...

But I get it, it’s a new way of playing eq, new things are weird, people don’t like changes, so there is the hide option. When new advloot came out people would turn it off as well, but I suspect 99% of players use it now.

Heck, people ask me how to turn off easyfind lol.

 

[deathlock]

Also, here is the thing about the group buttons and group member distance... once you get used to just quickly being able to see how far away everyone in group is from you and not having to alt tab over when they get stuck in a tree but simply just click the Come To Me button, or the next time you want everyone in group to hail the same npc as u and you just click Mimic Me and they all say after you, you will understand how great those buttons are...

I love the idea and I would find it totally useful. The only problem for me is the implementation. I do not mean this is a demeaning or spiteful way. I am just saying that if everyone used the same UI set up you use and had the same lay out, 80% of the whining about this would go away. There would be 80% more I love this!

My group window is just the right size to fit names and health bars. Simply cause I value the screen space and placement of it. Makes sense in my little world. I would love the distance numbers and buttons, I know I would. But I am just to stubborn to have a bigger (or different) group window. I have made hot buttons similar to the ones you have on the group window and placed them on a hot bar (Wish I could figure out how to do the Mimic one). So, I know I am sacrificing form over function, which I guess is my whole point.

I for one appreciate the things EQMule does for us, just some of them don't suit us all. The fact that you go outta your way to alter these things for us is above and beyond anything anyone could expect. Thanks for all you do bud!

 

[Cellular07]

I agree. I love everything, which is why i am trying so hard to make it work. Then, I was going to make write-up similar to what I have shown above.

 

[eqmule]

I went to the drakkah site, there are too many, you are going to have to eiter zip up your ui and post it, or give me a download link.

 

[eqmule]

I would love the distance numbers and buttons, I know I would. But I am just to stubborn to have a bigger (or different) group window.

Displaying distance next to the name shouldn't require you to resize the window, there is room there.

 

[deathlock]

Simple Stice Group Smaller (6 player)

https://www.eqinterface.com/downloads/fileinfo.php?id=6439

Any chance you can get that to work? I can not seem to get the distance figured out.

 

[eqmule]

(Wish I could figure out how to do the Mimic one).

I’ll add “/groupinfo mimicme” today then u can create a hotbutton and put it anywhere u like.

 

[Cellular07]

@eqmule, you are the best. I sent a PM with the .zip file

 

[eqmule]

Simple Stice Group Smaller (6 player)

https://www.eqinterface.com/downloads/fileinfo.php?id=6439

Any chance you can get that to work? I can not seem to get the distance figured out.

ok, so later today RG will get an update where u can set font size to 1 and then the below ini setting will work for the stice UI with a fontsize of 1

[UI_Simple_SticeGroup]
DynamicUI=1
GroupDistanceFontSize=1
UseGroupLayoutBox=0
GroupDistanceLoc=4,-10,70,0
ComeToMeLoc=51,17,6,46
FollowMeLoc=51,17,48,88
MimicMeLoc=51,17,90,130
HotButton0Loc=87,54,6,46
HotButton1Loc=87,54,49,89
HotButton2Loc=87,54,92,132
TargetInfoAnchoredToRight=0
TargetInfoLoc=34,48,0,40
TargetDistanceLoc=34,48,90,0
UseExtLayoutBox=0
ExtDistanceLoc=0,-20,70,0

here is what it looks like without buttons:


and with:

 

[eqmule]

@eqmule, you are the best. I sent a PM with the .zip file

Ok here is the ini section for that UI:

[UI_Drakah]
DynamicUI=0
GroupDistanceLoc=-3,-15,80,-30
GroupDistanceFontSize=2
ComeToMeLoc=36,2,4,44
FollowMeLoc=36,2,46,86
MimicMeLoc=36,2,88,128
HotButton0Loc=36,0,154,194
HotButton1Loc=36,0,194,234
HotButton2Loc=36,0,234,274
TargetInfoAnchoredToRight=0
TargetInfoLoc=50,62,0,60
TargetDistanceLoc=50,62,140,0
ExtDistanceLoc=0,-20,80,0
#don't mess with these 2 settings unless you are told to, they should be 0 for most UIs
UseGroupLayoutBox=0
UseExtLayoutBox=0

With buttons:


without buttons:

 

[dreamflux]

For Sparxx the settings I've found work are:

[UI_sparxx]
DynamicUI=0
UseGroupLayoutBox=0
GroupDistanceLoc=-2,0,0,60
ComeToMeLoc=35,1,1,41
FollowMeLoc=35,1,43,83
MimicMeLoc=35,1,85,125
HotButton0Loc=35,1,127,167
HotButton1Loc=35,1,169,209
HotButton2Loc=35,1,211,251
TargetInfoAnchoredToRight=0
TargetInfoLoc=34,48,0,40
TargetDistanceLoc=34,48,90,0
UseExtLayoutBox=0
ExtDistanceLoc=0,0,0,0
GroupDistanceOffset=0
GroupDistanceElementPrefix=GW_Gauge

On top of this the Sparxx groupwindow XML file needs editing. For the overall window you should change the CX/CY to 256 each. I've attached a copy of my edited XML for convenience. That will make the window end up looking like this:

 

[deathlock]

ok, so later today RG will get an update where u can set font size to 1 and then the below ini setting will work for the stice UI with a fontsize of 1

[UI_Simple_SticeGroup]
DynamicUI=1
GroupDistanceFontSize=1
UseGroupLayoutBox=0
GroupDistanceLoc=4,-10,70,0
ComeToMeLoc=51,17,6,46
FollowMeLoc=51,17,48,88
MimicMeLoc=51,17,90,130
HotButton0Loc=87,54,6,46
HotButton1Loc=87,54,49,89
HotButton2Loc=87,54,92,132
TargetInfoAnchoredToRight=0
TargetInfoLoc=34,48,0,40
TargetDistanceLoc=34,48,90,0
UseExtLayoutBox=0
ExtDistanceLoc=0,-20,70,0

here is what it looks like without buttons:
View attachment 15391

and with:
View attachment 15392

You are dah best, thanks!

 

[Redbot]

eqmule updated MQ2TargetInfo with a new update entry:

Dec 03 2018 by eqmule

- Added /groupinfo mimicme on|off - it will do what the button does but from commandline
- Added /groupinfo followme on|off - it will do what the button does but from commandline
- Added /groupinfo cometome - it will do what the button does but from commandline
- This means if you dont want those buttons on the group window, just rightclick
a group member and hide them, then create your own hotbuttons
and put them wherever you like to get the same functionallity.
- Fixed a bug in...

Read the rest of this update entry...

 

[Cellular07]

With the latest patch, everything looks and works to perfection. Such an awesome integration. Thank you @eqmule and all for the support.

 

[deathlock]

I agree. I love everything, which is why i am trying so hard to make it work. Then, I was going to make write-up similar to what I have shown above.

THanks to @eqmule this is working nicely. I do have one suggestion. The mimic me button works great for hailing and grabbing task, unless you have a rogue in the group. The rogue is always hiding and sneaky, which I tend to forget. Would be nice to have the toons make themselves visible before talking in say. This would of saved me a ton of headaches cause I am just that bad.