Guide - Sic's Hotkeys (3 Viewers)

[Deadlycrimson]

i watch the "move your toons guide" i run Rgmerc instead of Kissassist, so i changed the line for the Merc users to the correct line for camphere or campoff, but it isn't turning the macro back on, and it isn't turning back on the other plugin users as well, like my mq2rogue

 

[Sic]

i watch the "move your toons guide" i run Rgmerc instead of Kissassist, so i changed the line for the Merc users to the correct line for camphere or campoff, but it isn't turning the macro back on, and it isn't turning back on the other plugin users as well, like my mq2rogue

well, without you posting what you made your hotkey, it is impossible to say.

could you share what you changed?

also you might consider using mq2boxr - I don't personally use it, but it might help bridge the gap for you

 

[Deadlycrimson]

well, without you posting what you made your hotkey, it is impossible to say.

could you share what you changed?

also you might consider using mq2boxr - I don't personally use it, but it might help bridge the gap for you

 

[Sic]

please post the actual text not screenshots of text

me.class.shortname is incorrect and so is Me.Class.Shortname ---> it is Me.Class.ShortName --- case matters

your /returntocamp0 is likely not going to do anything as that is invalid

 

[Deadlycrimson]

please post the actual text not screenshots of text

me.class.shortname is incorrect and so is Me.Class.Shortname ---> it is Me.Class.ShortName --- case matters

your /returntocamp0 is likely not going to do anything as that is invalid

i switched to kissassist on everything, put the same lines you posted in your "video", and when i hit camp off hotkey, it kills kissassist instead of pausing it while moving?! still having the plugins running but went from Rgmercs to kissassist

 

[Sic]

i switched to kissassist on everything, put the same lines you posted in your "video", and when i hit camp off hotkey, it kills kissassist instead of pausing it while moving?! still having the plugins running but went from Rgmercs to kissassist

sorry, I'm trying to help you here but you not only skipped my response and pointing out the errors in the 2 screenshots you posted, but i guess now you're doing something completely different.

no, none of the hotkeys i posted "kills kissassist"

 

[Deadlycrimson]

sorry, I'm trying to help you here but you not only skipped my response and pointing out the errors in the 2 screenshots you posted, but i guess now you're doing something completely different.

no, none of the hotkeys i posted "kills kissassist"

i didn't skip your response, i fixed those issuses, and went to kissassist instead, when i hit camp off, it completely kills the kissassist,

with the same lines you have posted in your Video,

 

[Sic]

i didn't skip your response, i fixed those issuses, and went to kissassist instead, when i hit camp off, it completely kills the kissassist,

well you certainly didn't say anything like

"i made those changes, thanks for pointing that out, I'm now going to swap to kissassist and these are what my hotkeys looks like now, the problem is kissassist is ending" and then post your hotkeys.

you didn't do or any anything like that

 

[Sic]

Please post the actual text of the hotkey you need assistance with.

 

[Yama]

looks like your character names are in one of your screenshots btw

 

[Sic]

looks like your character names are in one of your screenshots btw

good eyes, i deleted it for them

 

[Sic]

this is the other screenshot you posted.

you can't /mqp something if you don[t have a macro running, like the red message you shared with me says.
you can't /returntocamp for a toon not using something that has that - like kissassist
in this image you have too many "/" for "/rg" you have 3 where there should be 2

 

[Deadlycrimson]

this is the other screenshot you posted.

you can't /mqp something if you don[t have a macro running, like the red message you shared with me says.
you can't /returntocamp for a toon not using something that has that - like kissassist
in this image you have too many "/" for "/rg" you have 3 where there should be 2

View attachment 48639

that fixed it, in your "Guide to move toons" you have 2 //'s which was fucking up the whole thing when i was translating to my hotkey

 

[Sic]

that fixed it, in your "Guide to move toons" you have 2 //'s which was fucking up the whole thing when i was translating to my hotkey

yes, eqbc uses 2, it doesn't use 3

 

[Happyfeet76]

How would you make a command to tell a wizard to use a specific gem slot, or spell? If I wanted to evac to Nek forest for example.

 

[Naeeldar]

How would you make a command to tell a wizard to use a specific gem slot, or spell? If I wanted to evac to Nek forest for example.

Depends what you are using but /bct wizzy //cast 7

 

[Sic]

How would you make a command to tell a wizard to use a specific gem slot, or spell? If I wanted to evac to Nek forest for example.

well - > i < would do a /dg wiz /wiz evac nektulos =p but you would do /dg wiz /cast # where # is the gemslot

 

[jjt]

Hi
i have a problem with my toons not following commands
war/cleric/sham all with cwtn plugins
im using
/bcg //camphere on
/war mode 7
/cwtn mode 1
/war resetcamp
my warrior is the only one following command sham an cleric just stand there i have been manually changing there modes
come to me/follow me /mimic me works fine
everything works great i just cant get group commands working
any assistance would be very helpful ty

 

[Sic]

Hi
i have a problem with my toons not following commands
war/cleric/sham all with cwtn plugins
im using
/bcg //camphere on
/war mode 7
/cwtn mode 1
/war resetcamp
my warrior is the only one following command sham an cleric just stand there i have been manually changing there modes
come to me/follow me /mimic me works fine
everything works great i just cant get group commands working
any assistance would be very helpful ty

Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<<


gotta setup the aliases

 

[RedJim]

I am confused, in the syntax /dgge /docommand /$\{Me.Class.ShortName}, I am assuming these are variable names.
docommand
Me.Class.ShortName
What do I put in the command for my ranger for example?
DoCommand = alt activate (some aa)?
Me.Class.ShortName = ToonName.rng.ranger?
Any help would be appreciated.

Thank you

 

[Sic]

I am confused, in the syntax /dgge /docommand /$\{Me.Class.ShortName}, I am assuming these are variable names.
docommand
Me.Class.ShortName
What do I put in the command for my ranger for example?
DoCommand = alt activate (some aa)?
Me.Class.ShortName = ToonName.rng.ranger?
Any help would be appreciated.

Thank you

well those look like aliases for the cwtn plugins (or other automations that use class shortname for their command). since that appears to be the case i'm going to merge this into my hotkeys guide, since there are many examples of how to achieve what you're looking to do

/$\{Me.Class.ShortName} gets resolved on the receiving end and each toon would automatically put them as their own class

so /dgge /docommand /$\{Me.Class.ShortName}

on a ranger that toon would type /rng
on a shaman that toon would type /shm
etc

which is unlikely what you're trying to do

it sounds more likely you just want to issue a command (not an alias) to your ranger to do something

you could use dannet to do this and create a hotkey

/dex rangername /alt act #

if you wanted all rangers to do it you would:
/dgex rng /alt act #
and all rangers on dannet (in the rng dannet channel) would execute the command

here is the eqbc -> dannet conversion chart
this works great as a dannet specific reference too

you can see here with the /dex <name> </command>

 

[RobRenfro]

sorry, I'm trying to help you here but you not only skipped my response and pointing out the errors in the 2 screenshots you posted, but i guess now you're doing something completely different.

no, none of the hotkeys i posted "kills kissassist"

If I'm understanding correctly he says he still has the Plugins running and RGMERCS while trying to run everything off Kissassist you've told me several times and said several times in public not to run multiple software it could conflict. I think his problem is trying to run 3 types of software at least some of the same toons.

 

[RedJim]

What I am trying to do is to get my entire group to do the same thing. Leap, bow, dance, etc..

 

[Many_Whelps]

What I am trying to do is to get my entire group to do the same thing. Leap, bow, dance, etc..

/dgae /bow

From the graphic Sic linked, /dgae address all characters, including the sending character, and sends them whatever follows the /dgae. In this case, a /bow emote.

 

[Lefty11106]

I am trying to follow the guide but am unable to get the alias's set up correctly. I posted the alias info in the INI file, reset aliases in game and am still getting errors when trying to use /cwtn commands. having to manually switch modes on my boxes to get them to do anything currently. Once set manually, and making sure i reset my camp on my shd things are going smoothly. Am I missing a step somewhere?

 

[Sic]

I am trying to follow the guide but am unable to get the alias's set up correctly. I posted the alias info in the INI file, reset aliases in game and am still getting errors when trying to use /cwtn commands. having to manually switch modes on my boxes to get them to do anything currently. Once set manually, and making sure i reset my camp on my shd things are going smoothly. Am I missing a step somewhere?

The guide steps are really bare bones.

Paste your ini file and/or just the contents of the alias section (there can only be one alias section)

 

[Lefty11106]

Paste your ini file and/or just the contents of the alias section (there can only be one alias section)

using the MQ ini file found in first screen shot, and copy/paste from original post for the aliases.

 

[Sic]

View attachment 50612View attachment 50613


using the MQ ini file found in first screen shot, and copy/paste from original post for the aliases.

can you confirm this is actually macroquest.ini and not macroquest.ini.txt ? you don't have file extensions visible
can you confirm there is 1 alias section. it is pretty unlikely that you don't have any other aliases (like /no and /yes)

 

[Lefty11106]

can you confirm this is actually macroquest.ini and not macroquest.ini.txt ? you don't have file extensions visible
can you confirm there is 1 alias section. it is pretty unlikely that you don't have any other aliases (like /no and /yes)

it is the ini.txt, that may be the issue then. I am not sure how to actually pull it up as an ini file.
double checking, there was indeed two alias sections. i swear it wasnt there the last 3 times i checked.

#fail.

 

[Sic]

it is the ini.txt, that may be the issue then. I am not sure how to actually pull it up as an ini file.
double checking, there was indeed two alias sections. i swear it wasnt there the last 3 times i checked.

#fail.

Ini.txt is incorrect
Double alias section is also incorrect

 

[Lefty11106]

Double alias sections that i missed fixed it, /cwtn commands are firing as anticipated now!

 

[kausali]

This is the alias I added to have all my toons mount using their Stat Mount
/mountup=/noparse /bcaa //if (!${Me.Mount.Stat.ID}) /useitem "${Mount.Stat}"

 

[JustGlassin]

Absolutely love these macros, they have improved my gameplay so much i cant thank you enough!

i noticed when i use the bard invis macro, since all my other toons are cwtn whenever i would use it my bard would go dead. kissassist would stop and chase mode would stop with it i solved it by just adding /bcga //mqp off to an extra line of the macro. likely not an elegant solution, but it keeps my bard following me and i use that command like 100 times a day and its one i need to be idiot proof

may be worth adjusting your macro somehow because it currently turns off my bard completely after the invis (i am a newbie though, very likely i have something configured wrong)

 

[Sic]

Absolutely love these macros, they have improved my gameplay so much i cant thank you enough!

i noticed when i use the bard invis macro, since all my other toons are cwtn whenever i would use it my bard would go dead. kissassist would stop and chase mode would stop with it i solved it by just adding /bcga //mqp off to an extra line of the macro. likely not an elegant solution, but it keeps my bard following me and i use that command like 100 times a day and its one i need to be idiot proof

may be worth adjusting your macro somehow because it currently turns off my bard completely after the invis (i am a newbie though, very likely i have something configured wrong)

sorry i don't use kiss for my bard and my bard doesn't do that. when i did i would just mqp it, and then drag it with follow me, come to me, or use fellowship

 

[JustGlassin]

sorry i don't use kiss for my bard and my bard doesn't do that. when i did i would just mqp it, and then drag it with follow me, come to me, or use fellowship

no worries ive seen that youve been on the elusive mq2bard which is why i felt this might go unnoticed (so hyped for the plugin! these other ones have changed my entire gaming life). but ive just noticed it as a constant thing i needed to do an extra action for doing one of the methods you mentioned. i havent noticed any cons to just restarting it with that line so far but i only just started using it

 

[ArcaneProphet]

Thanks for sharing these. I created an alias for CWTN commands on my driver so it's the same command no matter what class I'm driving with. This allows me to use the same hotkey on ButtonMaster Lua.

/csn=/docommand /${Me.Class.ShortName}

 

[wynge]

So i tried activating the /camphere on command on my SK and it keeps telling me this:



I am on test.

is this a known issue due to patch?
yes, i did look through Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First!
I only found how to start it with the /camphere on , posted below, but no talk on if there an issue or why it wont work.

/dgge /camphere on
/war mode 7
/cwtn mode 1
/war resetcamp

Thanks

 

[Sic]

So i tried activating the /camphere on command on my SK and it keeps telling me this:

View attachment 53969

I am on test.

is this a known issue due to patch?
yes, i did look through Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First!
I only found how to start it with the /camphere on but no talk on if there an issue or why it wont work.

Thanks

cwtn plugins don't use camphere at all.
that was an example for people who are using kissassist.

which is why there is this at the top of my hotkey page

--- anyone not running the matching automation would get an error for the commands if you're using mixed automations
--- this means an SK using mq2eskay doing a /camphere on is going to get a red error message because they're not using kissassist
--- this is ok, you can ignore this.

 

[phillsphan]

I know I read it somewhere but this is all like reading and ancient Alien language for me. I mean what is an "Alias"? Anyway I am running a mini raid of 15 toons with 3 groups doing Hunter in 2 Zones. How do I get the 2 groups in the same zone to follow my MA? All toons are using CWTN plugins. I know the answer is somewhere here but I am getting "dear in a headlight" after reading all 7 pages. I am also using eqbcs because I could never figure out how to get Dannet working(thats another issue for later).

 

[Darkwynd3]

I know I read it somewhere but this is all like reading and ancient Alien language for me. I mean what is an "Alias"? Anyway I am running a mini raid of 15 toons with 3 groups doing Hunter in 2 Zones. How do I get the 2 groups in the same zone to follow my MA? All toons are using CWTN plugins. I know the answer is somewhere here but I am getting "dear in a headlight" after reading all 7 pages. I am also using eqbcs because I could never figure out how to get Dannet working(thats another issue for later).

An "Alias" is an entry in your macroquest ini that translates a simple intuitive /command such as /cwtn so you don't have to type: /dgge /docommand /$\{Me.Class.ShortName}

The only way to natively get CWTN toons to behave as more than a group of 6 is to raid up and use raid mode. There are other alternatives, but they are not officially supported. When I want to run out of group DPS on my CWTN guys, I use the outassist Lua on one melee toon in the second group, and make him MA for the second group. https://www.redguides.com/community...assisting-on-a-mob-outside-of-the-group.2558/